AT101WSQ-N1A Information:

Brand	BOE
Model P/N	AT101WSQ-N1A
Diagonal Size	10.1"
Panel Type	a-Si TFT-LCD, CELL, Q-CUT (Full Cell)
Resolution	1024(RGB)×600, WSVGA 117PPI
Pixel Format	RGB Vertical Stripe
Active Area	222.72(W)×125.28(H) mm
Bezel Opening	-
Outline Size	230.4(W)×134.2(H) mm
Surface	-
Brightness	0 cd/m²
Contrast Ratio	600:1 (Typ.) (TM)
Viewing Angle	80/80/60/70 (Typ.)(CR≥10)
Display Mode	TN, Normally White, Transmissive
Best View on	6 o'clock
Response Time	25 (Typ.)(Tr+Td)
Glass Depth	-
Transmissivity	6.6% (Typ.)
Display Colors	262K 50%NTSC
Lamp Type	No B/L
Frequency	60Hz
Touch Screen	Without
Driver IC	COGBuilt-in 1 source + 1 gate chips
Panel Weight	-
Application	Automotive Display
Environment	Operating Temp.: -20 ~ 70 °C ;Storage Temp.: -30 ~ 80 °C

AT101WSQ-N1A Installation Tutorial:

Prior to Installation:Before embarking on the installation process of the AT101WSQ-N1A LCD screen, it is imperative to ensure your safety and the integrity of your equipment. To this end, kindly adhere to the following steps:

Power Off: Firstly, power down your device. Ensure that it is completely turned off and disconnected from any power source to prevent electrical mishaps during installation.

Unplug Screen Cable: Carefully unplug the existing screen cable from your device. This will prevent any potential damage or interference during the installation process.

Complete Installation: Only after meticulously following these precautions should you proceed with the installation. Reconnect the LCD screen and then, and only then, turn on the power.