LTI460HN11 LCD Screen Tracking Information:

SAMSUNG LCD SCREEN LTI460HN11
manufacturer	SAMSUNG
Model Name	LTI460HN11
screen size	46 inch
Screen type	a-Si TFT-LCD , LCM
Resolution	1920(RGB)×1080 [FHD] 47PPI
Pixel configuration	RGB vertical bar
Display size	1018.08 × 572.67 mm (H×V)
physical dimension	1021.98 × 576.57 × 72.1 mm (H×V×D)
Visual size	1018.28 × 572.87 mm (H×V)
surface treatment	Matte (Haze 44%), Hard coating (3H)
Brightness	500 (Typ.)
Contrast	3000:1 (Typ.) (TM)
Best angle	Full view
Optical mode	SVA, normally black display, transmissive
Viewing angle	89/89/89/89 (Typ.)(CR≥10)
Responding time	8 (Typ.)(G to G) ms
Number of color	16.7M, 100% sRGB
Backlight type	WLED, 50K hours, with LED driver
Stitching	3.9 mm (active to active seam)
Apply to	multi-screen
Refresh rate	60Hz
Touch function	No touch
signal system	LVDS (2 ch, 8-bit), connector, 51 pins
Supply voltage	12.0V (Typ.)
Maximum rating	Storage temperature: -20 ~ 65 °C Working temperature: 0 ~ 50 °C
*LTI460HN11 LCD For SAMSUNG Screen 19201080 46Inch**

LTI460HN11 LCD Screen LCD Condition Check:

Ensuring the good condition of your LCD screen is crucial in order to participate in project bidding successfully. It is essential to check the LCD display thoroughly for any damage or malfunction before presenting it to potential buyers. This will help to avoid any incompatibility issues and will leave a positive impression on clients.

As a responsible seller, it is your duty to ensure that all products are inspected carefully before being shipped to the buyers. This is in order to provide assurance that the products are functioning properly and will meet the buyer's requirements.

By taking these necessary precautions, you can establish a trustworthy and reliable reputation in the market. This will help you to attract more clients and achieve higher success rates in project bidding.

Remember, positivity and responsibility go hand in hand. So, always stay optimistic and take mindful steps to ensure quality products and services.

LTI460HN11 lCD Screen Product Usage:

LTI460HN11 LCD Screen Preventing Short Circuits:

When it comes to working with electronic devices such as controller circuit boards, it's essential to take necessary precautions to avoid any damage to the board or injury to oneself. One of the critical things to keep in mind while opening the circuit board is to avoid contact with metal at all times.

Making contact with metal while opening the board may cause a short circuit that can render the controller panel inaccessible. It can also cause damage to the circuit board components, leading to expensive repairs or replacement.

However, with a little care, this situation can be easily avoided. First and foremost, it's important to ensure that the surface and the tools you're using to open the controller circuit board are free from any metal fragments or conductors.

Additionally, it's essential to wear proper safety gear such as rubber gloves, which can help minimize the risk of any electrical shock or electrocution. Always disconnect the power supply before attempting to open the controller circuit board and handle the board with utmost care.

In conclusion, opening a controller circuit board can be a daunting task, but with proper precautions and care, it can be achieved without any damaging consequences. By following these simple yet effective safety measures, not only can we protect ourselves, but also prevent any damage to expensive electronic control devices.