P0840XGF1MB00 Information:

Brand	TIANMA
Model P/N	P0840XGF1MB00
Diagonal Size	8.4"
Panel Type	a-Si TFT-LCD, LCM
Resolution	1024(RGB)×768, XGA 152PPI
Pixel Format	RGB Vertical Stripe
Active Area	170.496(W)×127.872(H) mm
Bezel Opening	173.5(W)×130.87(H) mm
Outline Size	199.5(W)×149(H)×10.2(D) mm
Brightness	600 cd/m² (Typ.)
Viewing Angle	88/88/88/88 (Typ.)(CR≥10)
Best View on	Symmetry
Display Colors	262K/16.7M
Frequency	60Hz
Weight	301g (Typ.)
Surface	Antiglare
Contrast Ratio	1000:1 (Typ.) (TM)
Display Mode	SFT, Normally Black, Transmissive
Response Time	25 (Typ.)(Tr+Td)
Lamp Type	7S3P WLED , 50K hours , With LED Driver
Touch Screen	Without
Application	Industrial
Signal Interface	LVDS (1 ch, 6/8-bit), 20 pinsConnector
Input Voltage	3.3V (Typ.)
Environment	Operating Temp.: -30 ~ 80 °C ;Storage Temp.: -40 ~ 90 °C; Vibration Level: 2.0G (19.6 m/s²)

P0840XGF1MB00 Installation Instructions:

Thank you for your purchase! To ensure the successful installation of your panel, please keep the following instructions in mind:

1. Make sure that all necessary tools are readily available before beginning installation.

2. Exercise caution when handling the panel, as it is fragile and can be easily damaged.

3. Before installing the panel, make sure that the surface on which it will be placed is clean and free of any debris or dust.

4. The protective film on the front of the panel should first be removed, taking care not to touch the screen.

5. Once the protective film has been removed, you may notice a layer of polarizer film beneath it. This film can cause the display to appear blurry and should be removed before continued use.

6. After the polarizer film has been removed, the panel can be safely installed according to the manufacturer's instructions.

We hope that these guidelines will help ensure a successful installation process. If you encounter any issues or have any questions, please do not hesitate to contact our customer support team for assistance. Thank you again for choosing our product.