Medical mobile toll workstation
| 1. Car body parameters: | |
| (1) The whole vehicle adopts an integrated structure design | |
| (2) Main body material: composed of plastic and steel structure, fully covered by ABS on the work surface and the surface of the fuselage | |
| (3) The width of the working table is 500mm, the depth is 750mm, and the height of the working table is 1000mm | |
| (4)The base of the car body is equipped with four silent casters, at least two with brakes | |
| (5) The base is equipped with a pool box and battery | |
| (6) The front and rear of the workbench are equipped with armrests, which can be pushed and pulled | |
| (7)Equipped with: Smart currency detector, dot matrix printer, dot matrix printer, standard cash box, reserved for UnionPay POS card machine and receipt printer | |
| (8) The all-in-one computer is equipped with a high-definition camera, loop recording | |
| (9) The all-in-one computer is fixed on the table to prevent it from falling | |
| (10) Car body size: 795mm x 500mm x 1000mm | |
| 2. System parameters: | |
| Processor: | Intelcore i5 7th-10th generation (Intel Skylake-U series processors) |
| Internal memory: | 8 G DDR4 |
| Storage: | 128G SSD |
| Display screen: | 21.5 inches TFT liquid crystal display, resolution 1920x1080 |
Network: | Dual Gigabit wired network ports, Ethernet 10/100/1000MB Base-T LAN; Wi-Fi802.11ac, 2.4GHz/5GHz dual band |
| Bluetooth: | Bluetooth 4.0 LE |
| 4G/5G module (optional): | optional built-in 4G module or 5G module, external with SIM card slot |
| Touch screen (optional): | optional capacitive touch screen |
| Support operating system: | Windows 10 & Windows 7 |
| Audio and video system: | built-in high-definition camera and dual microphones, built-in speakers (optional) |
| 3. Power system: | |
| (1) The use of high-performance lithium batteries should meet the low-pollution requirements of the hospital, and reserve double-capacity upgrade space | |
| (2) The number of effective battery charging and discharging cycles should not be less than 2500 cycles | |
| (3) Output power: 1000W | |
| (4) Peak power: 2000W | |
| (5)Battery performance: When the battery is fully charged, the continuous working time should be ≥8 hours | |
| (6) With low battery alarm function, when the battery capacity is lower than 20%, the buzzer will automatically sound, and when the battery capacity is lower than 10%, it will automatically shut down | |
| (7) The battery itself should be equipped with an over-discharge protection device | |
| 4. Printing unit: | |
| Dot matrix printer: | Epson (EPSON) LQ-610KII |
| The size does not exceed: | 450mm*320mm*210mm other brand printers |
| Power does not exceed: | 500W |
| Laser printer: | Hewlett-Packard (HP) P1106 monochrome laser printer |
| The size does not exceed: | 400mm*240mm*250mm other brand printers |
| Power does not exceed: | 500W |
Medical mobile toll workstation
Hot Tags: medical mobile toll workstation, China, suppliers, wholesale, buy, cheap, discount, low price, in stock
