The basic principle of the electronic optics seamless splicing LCD splicing wall is to install a unique optical lens control panel body on a general 3.5 mm control panel, and complete the basic principle of field of view mapping according to the laminated glass, so that the interface that originally appeared to be divided is based on The optical lens can be seen from this in an image, and the seam of the black frame is completely invisible, completing the visual splicing
1. The joints use full-screen LED electronic devices to display the information on the definition compensation, and use the basic principles of optical lenses and electronic optical mapping to complete the splicing.
2. The pixel number interval for the definition calibration of LED electronic devices is less than 1.5 mm, which makes the gap basically invisible.
Third, the LED for the definition of electronic devices uses SMD marking technology instead of large-particle lamp-shaped display information, which promotes a milder lighting effect and reduces the harm caused by the gap to the visual effect.
4. After the definition of the LED electronic device is calibrated, the edge of the convergent lens with high transmittance is added to make the LED light source more gentle and closer to the true color of the LCD screen.
