A list of common faults and solutions for advertising machines

Jun 05, 2021

Leave a message

Driven by the informationization of the Internet, the application range of digital signage has continued to expand. As a product of the new media era, advertising machines have gradually entered the ranks of "arcade machines". However, because many users do not have professional advertising machine knowledge and technical principles, they are often at a loss to deal with the problems that arise during the use process, and can only find the manufacturer's customer service staff to help solve them, which greatly wastes time and money. In order to further improve the efficiency of the advertising machine and allow users to master basic knowledge and maintenance skills, this article sorts out the eight major problems that are prone to occur during the use of the advertising machine and their solutions, hoping to be helpful to everyone.


 


When turning on and off the advertising player, interference patterns appeared on the screen


Generally speaking, this phenomenon is caused by the signal interference of the display card, which is a normal phenomenon, and the user can solve it by adjusting the phase automatically or manually.



Thumb-sized black spots appear on the display screen


Most of this phenomenon is due to the squeezing of external forces. Under the pressure of external force, the polarizer in the liquid crystal panel will be deformed. This polarizer is like aluminum foil. It will not bounce up after being recessed. This causes the difference in the reflection of the liquid crystal panel, and the dark part will appear. Part of it is easy to find under the white screen, and the general size is more than ten square millimeters, which is the size of a thumb. Although this phenomenon does not affect the service life of the LCD screen, it still affects the overall aesthetics, so users should pay more attention not to press the LCD screen with their fingers.


 


Nothing happens when plugged in


This is the most common problem in practical applications. For this problem, the user can try to open the back cover of the advertising player to check whether the dedicated power supply is powered on. Specific method: Use a multimeter to measure whether the indicator light is on. If it is normal, it means that the power supply is powered. The power supply problem is ruled out, and the user should check the power on of the decoder board, advertising player drive board, high-voltage bar, speaker, and LCD screen in turn. Where there is no power, it means that there is a problem with the accessories of the advertising machine.


 


There is no display on the screen, and the indicator light on the front panel flashes


After this problem occurs, the user should check whether the signal cable connection between the monitor and the computer is firm, and check whether the signal cable connector is broken or bent or damaged.


 


The advertising machine screen flickers


During the playback of the advertising player, the screen flickers is also a problem that users often encounter. In this regard, the user must first perform exclusion checks on external factors such as the magnetic field around the device, power supply voltage and other external factors. If it still cannot be used normally, it is necessary to perform a comprehensive check on the display's graphics driver to eliminate program installation problems. After the above operation is invalid, the user can also try to increase the refresh rate by 75HZ to see if it is feasible. If none of the above operations can achieve satisfactory results, the user needs to send the equipment to the manufacturer for inspection and repair.


 


The screen is blank and displays "Signal out of sync range" or "OUT OF RANG"


This phenomenon is a thorny problem that users often see in practical applications. Generally, the signal sent by the computer exceeds the display range of the display, and the display detects an abnormal signal and stops working. In this regard, the user can try to restart the monitor and reset the output frequency of the computer.




There is no sound when the ad player is playing


The user can first open the back cover of the advertising player, use a multimeter to check whether the drive board is powered on, and then check whether the speaker cable is connected properly. If the loudspeaker is noisy, it means that the advertising player's drive board has been damaged and needs to be replaced immediately.


 


The cleaning problem of advertising machine


Do not use any cleaning agents when cleaning the advertising machine shell, otherwise it will easily cause the shell to lose its factory luster, so it is best to choose a cotton cloth soaked in water to wipe; when cleaning the LCD screen, avoid using a wet cloth with too much moisture to prevent moisture from entering The screen causes an internal short circuit. It is best for users to use soft objects such as glasses cloth and lens paper for wiping, which can prevent moisture from entering the inside of the screen and prevent scratches.


 


It is also worth noting that many users think that LCD screens have strict requirements on the humidity of the air, but this is inaccurate. Generally speaking, the advertising machine can work normally if the humidity is maintained between 30 and 80. Once it exceeds, condensation will occur, which will easily cause leakage or even short-circuit when the internal power transformer and other coils are damp.


Send Inquiry