1. Reduce energy consumption, save energy and reduce emissions.
Outdoor full-color LED displays must respond to the government’s call. Outdoor full-color LED displays must regard energy conservation and emission reduction as an important implementation standard, including product energy consumption, product scattering, and the amount of steel required for product installation.
2. High protection level.
In general, outdoor full-color LED displays have a large installation area and are mostly installed in densely populated places. Therefore, especially in the southeast coastal areas where typhoons frequently land, special attention should be paid to the protection level of the display, and the design should consider the basis With solid steel structure, wind load, waterproof, moisture-proof and other factors, the protection level should be above IP65 to extend the service life of the display and enhance the reliability.
3. The high-definition wire can better present the advertising picture.
As the main carrier of video advertising, outdoor full-color LED displays need to have high-definition display effects. Including high-definition, high-brightness, high-contrast, etc., high-definition and high-quality advertising images perform well; high-definition images are clear under direct sunlight; high-contrast means that the images are uniform in color and delicate.
4. Wide geographical coverage for viewing from a large viewing angle.
The main task of outdoor full-color LED display is advertising-level image publicity. Therefore, letting more viewers see the screen is the primary goal of outdoor full-color LED display. The design of large viewing angle enables wider viewing angle coverage.
5. Lightning protection and grounding to prevent power leakage.
For lightning protection, the LED main body and housing should have good grounding measures, and consider whether the display screen is installed independently or separately considering the grounding method of the external wall of the building.
At the same time, the integration of electronic components in outdoor full-color LED displays is higher, and the sensitivity requirements for anti-interference are getting higher and higher. In order to minimize electromagnetic interference, lightning protection devices should generally be installed on displays and buildings.
