Common problem of industrial tablet computer control computer 1: What if your keyboard and mouse can always operate normally, but suddenly fail one day?
answer:
1. Confirm whether the keyboard lock of the industrial computer is accidentally locked, please release the keyboard lock;
2. Please confirm whether the keyboard and mouse cables are firmly connected to the keyboard and mouse ports of the motherboard.
Common problem of industrial control computer 2: After the industrial computer is powered on, the power output status indicator on the passive backplane will turn off once it is on. What should I do if it cannot be powered on?
answer:
1. Confirm whether there are metal foreign objects such as screws in the industrial computer, which may cause a short circuit;
2. Confirm whether the wiring of the power supply in the industrial computer is correct, resulting in a short circuit to ground;
3. Please use the replacement method to replace the power supply of the same specification;
4. If it still cannot be powered on, please contact the manufacturer immediately.
Industrial control computer FAQ 3: The industrial computer does not start after it is turned on, but I can hear the beep... What should I do if it continues to alarm for a long time?
Answer: 1. Confirm whether the connection between the memory module and the motherboard is firm;
2. Check whether the gold finger of the recommended memory stick is dirty;
3. Use an eraser to wipe the gold finger of the memory stick and test it;
4. Replace the memory stick with another memory slot for testing;
5. Use the replacement method to replace the memory stick test of the same specification.
Industrial tablet computer control computer FAQ 4: What should I do if the industrial computer keeps restarting after it is turned on and displayed?
Answer 1. Please confirm whether the RESET button of the hard reset of the industrial computer is always in the state of forced startup;
2. Please hard reset the RESET button to return to the normal state.
