IPC Industrial control computer FAQ 1: What if your keyboard and mouse can always operate normally, but suddenly fail one day?
Answer: 1. Confirm whether the keyboard lock of the industrial computer is accidentally locked, please release the keyboard lock;
2. Please confirm whether the keyboard and mouse cables are firmly connected to the keyboard and mouse ports of the motherboard.
Typical industrial control computer common problem 2: After the industrial computer is powered on, the power output status indicator on the passive backplane will turn off once it is on. What should I do if it cannot be powered on?
Answer: 1. Confirm whether there are metal foreign objects such as screws in the Shenzhen YONGS industrial computer, which may cause a short circuit;
2. Confirm whether the wiring of the relevant power supply in the industrial computer is correct, resulting in a short circuit to ground;
3. Please use the replacement method to replace the power supply of the same specification;
4. If it still cannot be powered on, please contact the manufacturer immediately.
Typical industrial control computer FAQ 3: Shenzhen YONGS industrial computer does not start after it is turned on, but can hear the beeping... What should I do?
Answer: 1. Confirm whether the connection between the memory module and the motherboard is firm;
2. Check whether the gold finger of the recommended memory stick is dirty;
3. Use an eraser to wipe the gold finger of the memory stick and test it;
4. Replace the memory stick with another memory slot for testing;
5. Use the replacement method to replace the memory stick test of the same specification.
IPC FAQ 4: What should I do if the Nanjing IPC keeps restarting after it is turned on?
Answer: 1. Please confirm whether the RESET button of the hard reset of the industrial computer is always in the state of forced startup;
2. Please hard reset the RESET button to return to the normal state.
