In our daily life, we all know that electronic products will have some failures more or less during the use process. When the touch screen of the industrial tablet computer fails, what are the solutions? In fact, in daily maintenance, we can also take maintenance measures to prevent malfunctions. So, what are the measures to maintain the touch screen of an industrial tablet computer?
1) Before turning on the computer, wipe the screen with a dry cloth every day.
2) Water droplets or drinks falling on the screen will cause the software to stop responding. This is because water droplets and fingers have similar characteristics, so they need to be wiped off.
3) The touch screen controller can automatically determine the dust, but too much dust will reduce the sensitivity of the touch screen, just wipe the screen clean with a dry cloth.
4) Use glass cleaner to clean dirty fingerprints and oil stains on the touch screen.
5) Turn the power on and off in strict accordance with the regulations, that is, the order of turning on the power is: display, audio, and host. Turn off the power in the reverse order.
6) A large number of temporary files are generated on the hard disk. If you frequently break points or simply shut down without exiting Windows, it will quickly cause hard disk errors. Therefore, it is necessary to run scandisk regularly to scan for hard disk errors. It is best to set a secret way in the application to exit the application and to power off the windows. For example, click the four corners in the prescribed order.
7) The pure touch screen program does not need the mouse cursor, the cursor will only make the user's attention distracted.
8) The simplest anti-mouse mode that is sufficient for the application should be selected, supported by Siemens S7 200 technology, because the complicated mode requires the sacrifice of delay and system resources.
