1. How to install wall-mounted splicing screen
1. It is necessary to accurately measure the position of the wall hanging;
2. Install the wall bracket;
3. Install splicing screen;
4. Finish the work by debugging signals and so on.
Second, the method of installing floor-to-ceiling splicing screens
1. Assemble the entire floor stand;
2. Fix the floor stand at the screen installation position, the ground is fixed, and the back should also be fixed;
3. Set up power lines, signal lines, etc.;
4. Assemble the splicing screen, and then debug training and other work;
Three, the installation method of the splicing screen of the cabinet
1. Install the bracket in the cabinet and fix it;
2. Install LCD splicing screen and power on;
3. Install the front door, back door and side door of the cabinet;
4. Need to debug the splicing screen signal, brightness, etc.;
Four, front maintenance type installation method
The pre-maintenance method is similar to the wall-mounted installation method. Only after the front maintenance type is installed, it can be ejected hydraulically, which is convenient for after-sales and maintenance.
