This new application discloses an embedded industrial tablet computer, including a tablet computer host, the front of the tablet computer host is provided with a touch display screen, and the reverse side of the tablet computer host is clamped with a twist base, and the bottom of the twist base is not twisted. Variable shaft, a sliding base is sleeved on the outside of the torsionally invariable shaft, the bottom of the sliding base slides continuously with a base slide, the outer side of the base slide is constant and continues to have a constant bottom plate, and the constant bottom plate There are bolts to place the side strips on the side of the twisted base, and the adjustment lock tongue is embedded in the inside of the torsion base. In this new type of application, the rotating base can adjust the angle of the human-machine interface of the tablet computer, which is convenient for application, and the sliding base can store the tablet computer in the cabinet, so that the tablet computer will not be collided by the external environment, and the safety of the tablet computer is improved. .
An industrial tablet computer that can be quickly protected includes a front cover plate and a rear cover plate, a touch screen is embedded in the display area of the front cover plate, and a display screen is arranged on the reverse side. The reverse side of the rear cover is provided with a destructible bottom case. A circuit board is arranged on one side of the back cover compared to the bottom case, and the circuit board is provided with a multi-pin female seat connected to the touch screen and a second multi-pin female seat connected to the display screen. The bottom case is equipped with a control motherboard and a performance motherboard with a high-low stack configuration, and the control motherboard and the performance motherboard can destroy the power supply through a set of multi-PIN sockets. The master board is provided with a multi-PIN male socket and a second multi-PIN male socket corresponding to the multi-PIN female socket and the second multi-PIN female socket. The main board is kept in the upper part of the bottom case, and the main board is kept in the lower part of the bottom case. The purpose of this new application is to solve the problem that existing industrial tablet computers are difficult to protect quickly.
