LCD splicing screen is a splicing screen body that uses LCD display units to splice and achieve a large screen display effect through splicing control software system. At present, the commonly used sizes on the market are 42 inch, 46 inch, 55 inch, and 60 inch LCD splicing screens. The mainstream splicing methods include 6.7mm splicing of 46 inch ultra narrow edge wave crystal splicing, 5.3mm splicing of 55 inch ultra narrow edge LCD splicing, and various combination methods. Wave crystal splicing walls can be spliced with small screens, large screens, or any combination (MxN) for splicing display.
1. High brightness and high contrast: DID LCD splicing screens have high brightness, unlike ordinary TV, PC LCD screens - TV or PC LCD screens generally have a brightness of only 250-300cd/m2, while DID LCD screens can reach a brightness of over 700cd/m2. The contrast ratio of DID LCD splicing screen is as high as 1200:1, even up to 10000:1, which is more than twice that of traditional PC or T LCD screen and more than three times that of general rear projection.
2.Thanks to the color calibration technology specially developed for DID products, this technology can not only calibrate the color of static national surfaces, but also calibrate the color of dynamic images. This ensures the accuracy and stability of the image output. In terms of color saturation, DIDLCD can achieve a high color saturation of 80% -92%, while the current color saturation of ordinary CRT is only about 50%.
3. Uniform brightness, stable image without flicker. Due to the fact that LCD displays maintain their color and brightness at each point after receiving a signal, unlike CRT which requires constant pixel refresh. Therefore, a wave crystal display has uniform brightness, high image quality, and absolutely no flicker.
4.120HZ
Doubling refresh rate, the 120Hz doubling LCD display technology of DID products can effectively solve the problems of ghosting, blurring, and enhancing the clarity and contrast of images during rapid motion, making the images clearer
Long term viewing is also less likely to fatigue the eyes.
5. With a wider viewing angle, this technology can achieve dual 180 ° (horizontal and vertical) viewing angles. Through the application of PVA technology, also known as "image vertical adjustment technology", the LCD splicing screen has a wider viewing angle.
6. Pure flat panel display, LCD is the representative of flat panel display devices, it is a true flat panel display, completely curvature free large format without distortion.
7.The 7-ultra-thin narrow edge design and LCD splicing screen not only have the characteristics of a large display area, but also have the advantages of being ultra light and thin, making it easy to splice and install. The splicing dedicated LCD screen, with its excellent narrow edge design, makes the edge of a single piece even less than 1cm, so the small edge effect will not affect the overall display effect of the entire screen.
8. High service life, the service life of DIDLCD LCD backlight can reach more than 50000 to 100000 hours, ensuring the consistency of brightness, contrast, and chromaticity of each LCD screen used in splicing displays after long-term use, ensuring that the service life of the display screen is not less than 50000 hours.
9. Better reliability, ordinary LCD screens are designed for TV and PC monitoring and do not support continuous use day and night. The ID LCD screen is designed for the monitoring center and display center, supporting 7x24 hour continuous use.
