In order to test the condition of frequent rain, outdoor LED display must be waterproofed. How to waterproof outdoor LED display? What are the special requirements for the box structure? The following is the situation of LED displays produced by Winbond Ying Optoelectronics:
The LED tube module and the sealed box structure are processed to form an outdoor LED display waterproof box to protect the outdoor LED display from water. Therefore, the LED box is the basic unit that composes the outdoor LED display, and it is also the most important.
Outdoor LED display
Advantages of using LED box structure:
1. Convenient for logistics, obsolescence, on-site maintenance, etc.
Second, it is convenient to pack and transport.
Third, it is convenient to install and disassemble on site.
A display module is installed on the front part of the outdoor LED display waterproof box, the rear cover of the display drive box is fixed in the box, and a fan is also installed. The utility model has the functions of anti-corrosion, moisture-proof, anti-oxidation, flame-retardant, etc. through the outer spraying treatment, and ensures the safe operation of the outdoor LED display screen.
Outdoor LED display structure:
1. Outdoor fully waterproof LED module;
2. The rear of the module should be coated with three anti-coatings;
3. The box should be a waterproof box with good sealing performance.
It can be used for waterproof test and spray test on the surface of outdoor LED display. After many tests, the IP waterproof protection level of the outdoor LED display cabinet must reach IP65 to be truly waterproof. The specific protection function depends on the IP waterproof level at the factory.
