In order to meet the production in the harsh industrial environment, industrial computers have played a vital role. Although industrial computers are generally dust-proof and waterproof, in the case of heavy dust, over time, there will be a lot of dust on the display. Improper cleaning methods are very likely to damage the display, and the LCD screen can only be replaced with a new one if it is broken, so the correct cleaning method is the fundamental to ensure the life of the industrial display.
If there is only dust on the surface of the screen, use a soft dust-free cloth to gently wipe the dust off. Remember, all work should be done in a completely power-off environment. Just clean the dust, the uninterrupted power does not cause damage to the screen, but people may still get an electric shock, so we must pay attention to the safety of electricity.
If there is not only dust on the surface of the screen, but also other difficult-to-handle stains, a screen cleaner is needed to assist in cleaning the screen if it cannot be handled with only a dust-free cloth.
Take a piece of dust-free cloth and wrap it around your fingers, and spray a little screen cleaner on the dust-free cloth (remember not to spray directly on the screen, it is easy to spray too much, which is not easy to handle), and place the industrial display horizontally, with the screen facing up and horizontally And one-way wipe, from top to bottom line by line, generally can be cleaned once, if you feel that there are still some stains, you can wipe it again. During the wiping process, remember not to apply too much force, as too much force may damage the LCD screen.
Then take a lint-free cloth and perform a second wipe. This wipe is to wipe off the detergent residue on the screen. If this step is not performed, it will leave a shallow water mark after air drying. After the second wipe, the screen can be left Shining as new.
Drying, this is also very important, generally one to two hours is appropriate, after drying, you can see an almost brand-new industrial display.
