In order to improve the efficiency of the LCD splicing screen and extend its service life, in addition to mastering its use, it is also very important for daily maintenance. Of course, maintenance includes many aspects, such as: heat dissipation, dust prevention, cleaning, etc. Then, what are the specific requirements that need our attention? Let's take a look at it together.
1. How does the LCD seamless splicing screen do a good job of heat dissipation?
Method 1 Control the ambient temperature
Keep the environment where the LCD splicing screen is ventilated; you can control the ambient temperature by using a fan or air conditioner to reduce the temperature of the LCD screen; try to avoid the uninterrupted long-term use of the LCD splicing screen, and rest by changing programs and shutting down.
Method two regular inspection
Technicians regularly check the usage of various display screens, good inspection habits, and any quality problems can be eliminated in time, and deal with them as soon as possible to ensure safe and timely use; it can also avoid LCD splicing screens caused by high temperatures. The unit board is faulty.
Method 3 Use of thermally conductive materials
Choosing LCD splicing screens The splicing screens that use more high-quality and durable heat-conducting materials are not only maintenance, but also able to dissipate heat in time.
You can refer to the above three methods to let our LCD splicing screen better cope with the hot summer and maintain a good working environment and working condition.
Second, how to do a good job of cleaning the LCD seamless splicing screen?
As of 2013, the utilization rate of large LCD screens in the market has been very popular, so the shadow of large LCD screens can be seen everywhere in the streets and alleys. Nowadays, large screens are widely used and bring a lot to users. The problem of headaches, such as how to clean the large LCD screen after a long time, is also a problem that users are more concerned about.
Use a general soft cloth or paper towel to wipe the LCD screen. Never use a general soft cloth or paper towel to wipe the LCD screen. For soft LCD screens, their surface is still too rough and it is easy to scratch the delicate LCD screen.
Use alcohol and other chemical solvents to clean the LCD screen. Today's LCD screens are coated with a special coating on the screen. Once alcohol is used to wipe the display screen, this special coating will be dissolved, which will adversely affect the display effect.
The above points are for our reference only. In fact, only by knowing how to maintain our items in life can we use them more reasonably. I hope that everyone will clean them in the correct way in daily life. Similarly, if you still have some things that you don’t understand. , You are welcome to inquire.
Third, how to prevent the LCD seamless splicing screen from dust?
In the use of large LCD splicing screens, not only a suitable environment is needed, but cleaning is also very important. It can not only maintain its bright and clear display effect, but also extend its service life, so how to do a good job of the large LCD screen How about cleaning? Shenzhen Hualinuo will help you.
Method to wipe dust:
When the LCD splicing screen has dust that needs to be erased, our cleaning work is also exquisite at this time, so as not to affect the service life of the LCD splicing screen.
1. Before wiping the dust on the LCD splicing screen, be sure to turn off the power, and after the power plug is pulled out from the power socket, make sure that the LCD splicing screen is not powered on. Because the LCD splicing screen still has high voltage after power off for a period of time, it will be eliminated after a period of time. Therefore, dust-wiping work cannot be performed immediately after unplugging the power source.
2. Do not use an electrostatic cloth to clean it directly, a soft cleaning cloth and a special screen cleaning liquid must be used.
3. Use a soft and clean cleaning cloth to gently bounce off the dust on the LCD splicing screen. No need to apply too much force to avoid leaving marks on the screen, just gently wipe it.
4. After the dust is removed, use a special screen cleaner and spray it evenly on the screen. After waiting for a while, the screen cleaner will evenly spray the cleaning liquid on the cleaning cloth. Wait a few seconds to make the screen When the detergent is completely infiltrated into the cleaning cloth, wipe it gently, and then move the cleaning cloth slowly, moving in one direction. Do not move too fast.
5. After wiping the screen of the LCD splicing screen, the screen cleaner on the screen is not dry. We can use a fan to blow on the screen for a while to completely evaporate the cleaner on it. Do not use a hair dryer to blow it. The heat dissipation is large and the range is small, which is easy to cause dead pixels on the screen.
