Nowadays, with the development of the times and the progress of science and technology, explosion-proof splicing screens are widely used in various industries: KTV, five-star hotels, hospitals, bars, etc. Its characteristics are explosion-proof industrial panels, strong impact resistance, ultra-narrow seams, stable performance, unique splicing technology, no external separators, simple and flexible control. The service life is more than 60,000 hours, and it can work continuously for 7X24 hours. In order to better extend the service life of the explosion-proof splicing screen and ensure the normal operation of the screen, the following Hualinuo will share with you how to maintain the screen and improve its service life.
1. Maintenance of the body.
The use time of the explosion-proof splicing screen itself has a certain period of time. The switch of the body will cause certain damage to the splicing screen. Frequent switching will cause damage to the electronic components of the screen, which will affect the use of the LCD splicing screen and affect its life. . Can use remote control to operate on the computer.
2. Technical maintenance.
Electronic equipment often has static electricity, and splicing screens are no exception. Static electricity will cause dust in the air to adhere to the screen, so proper cleaning must be done. Do not use a damp cloth when cleaning. The wetted material not only has a poor cleaning effect, but also may cause the circuit to wet, but it may cause unnecessary losses. Therefore, the maintenance of the LCD splicing screen must be technical.
3. Cleaning and maintenance.
Adhere to the habit of cleaning the splicing screen regularly. You can use a damp cloth to clean the screen. Be careful not to use a damp cloth with too much moisture to prevent water from entering the screen and causing internal short-circuits and other faults. It is recommended to use soft wipes such as glasses cloth and lens paper to wipe the screen. To deal with some oily dirt that can't be wiped off, you can use transparent glue to paste on the accidentally soiled screen, and then slowly tear it off. You can find that the transparent glue will take away a lot of dirt. Repeat this several times and then dirty the screen. It can also be cleaned up.
