With the rapid development of society, LED display has gradually entered people's sight. LED displays have replaced the old fashioned way of advertising. The most commonly seen on the street now are advertisements made by LED displays. So how should the LED display be installed? YONGS LED display to explain to you.
1. Insert the DVI display card into the AGP socket of the motherboard, and then set the driver;
2. Insert the data card into the PDI socket on the motherboard (this is for users with a data card);
3. Link the two controls DVI and AGP installed above together;
4. Connect the control line to the serial port Rs232;
5. Connect with the receiving card with a network cable; the specific number is according to the engineering drawings;
6. Check that the connection is correct, you can set or power on the debugging.
