Introduction of LED display power calculation method

Sep 27, 2021

Leave a message

Now the application penetration rate of LED display has been very high. When purchasing LED display, there are many calculation formulas. Only when the calculation is correct, can the best LED display be selected. Such as spacing, length and height, number of modules used, etc. But many people don't know much about this. Today, YONGS LED display will tell you about his power calculation method.

The formula for power is P=UI.

P stands for power, U stands for voltage, and I stands for current. Usually, the power supply voltage we use is 5V, and the power supply is 30A and 40A; single color is 8 unit boards and 1 40A power supply, and two-color is 6 unit boards. 1 power supply; The power of the outdoor screen is very clear in the "product parameters" on the website.

An example will be given below:

A unit needs to make an indoor 5.0 two-color electronic screen of 9 square meters, and calculate the maximum power required. First, it is very simple to calculate the number of 40A power supplies = 9 (0.244*0.488)/6=12.5=13 power supplies (to be an integer, whichever is larger), the maximum power P=13*40A*5V=2600W. The power of a single lamp = the power of one lamp 5V*20mA=0.1W.

The power of the LED display unit board = the power of a single lamp * resolution (the number of horizontal pixels * the number of vertical pixels) / 2.

The maximum power of the screen = the resolution of the screen * the number of lights per resolution * 0.1.

The average power of the screen = the resolution of the screen * the number of lights per resolution * 0.1/2.

The actual power of the screen = the resolution of the screen * the number of lights per resolution * 0.1 / the number of scans (4 scans, 2 scans, 16 scans, 8 scans, static).

Send Inquiry