Precautions for the use of industrial touch screens

Jul 05, 2020

Leave a message

1. The film surface of the touch screen is the touch surface, which is the front of the product; the glass surface is the non-touch surface, which is the back of the product



     2. The touch screen part is made of glass, and the glass corners are sharp. Please wear gloves/finger cots when assembling.



     3. The industrial touch screen is made of fragile glass. Do not apply strong impact to the touch screen during assembly.



     4. Avoid directly picking up the lead wire and touching the industrial display, and avoid pulling the lead wire.



     5. The part of the lead wire reinforcement plate cannot be bent.



     6. Any part of the lead wire is not allowed to be folded in half.



     7. When assembling, the lead wire must be inserted horizontally, and cannot be inserted in half at the root of the reinforcing plate.



     8. Single-chip operation is required when picking and placing products, and handle with care to avoid product collisions and scratches on the product surface.



     9. When cleaning the surface of the product, please wipe it with a soft cloth (deerskin) dipped in petroleum ether.



     10. Do not use corrosive organic solvents to wipe the surface of the industrial touch screen film. Such as industrial alcohol.


Send Inquiry