Outdoor advertising machines are currently the most popular products for outdoor media advertising. More and more media, businesses, transportation, municipal construction, etc. have begun to install and use outdoor advertising machines to promote policies or brand information, but the use of outdoor advertising machines In the process, you must know these safety knowledge. The following is an example of Xunbao outdoor advertising machine products to illustrate what safety matters should be paid attention to.
Outdoor advertising machine safety precautions
1. Before installation, please read the product manual of the outdoor advertising machine carefully to confirm whether the local voltage is consistent with the requirements of the manual.
2. The display of Xunbao outdoor advertising machine has been tested and meets the IP65 standard level. It can be placed outdoors or even in the rain, but it cannot be protected from being immersed in liquid.
3. If the outdoor advertising machine is exposed to the sun for a long time, the surface of the LCD display and the casing may be very hot, please do not touch it.
4. Do not install the monitor near the open flame source, and never use the monitor at the open flame source
5. In order to prevent the display from being damaged, the liquid crystal display must be firmly installed on the ground or on the fixed bracket according to the installation method in the instruction manual.
6. The surface of the outdoor advertising machine cannot be covered by other objects, so as not to affect the heat dissipation effect.
7. Before cleaning and maintaining the internal components, disconnect the power supply of the monitor.
8. Do not apply liquid cleaners or spray cleaners directly to the display case and glass, but use a damp cloth for cleaning.
9. The internal components and lines of the display cannot be changed or disassembled arbitrarily without the guidance of professional engineers, and the manufacturer does not assume any responsibility for the damage to the display components.
10. When the monitor is working, it is forbidden to touch the internal electrical components, and the manufacturer does not assume any responsibility for the personal injury caused by this.
