With the rapid development of the screen display industry, touch operation has become a behavioral habit of modern people, so now the product market for all kinds of touch smart phones and touch all-in-ones has ushered in a hot development cycle.
I have to admit that the slogan of the Internet of Things technology is screaming loudly every year, and many new technological applications and enterprise products are constantly being applied. We all know that the higher the configuration of the smart phone, the higher the smoothness of use, and the less likely to be stuck. The same is true for advertising machines. At present, the use of touch all-in-one machines is quite broad, whether in banks or It can be seen in telecommunications payment, bank inquiries or large-scale supermarkets. As a key part of the automatic control system, it is indispensable on the computer to execute and export console commands.
First of all, in terms of the natural environment at work, the automatic control systems are generally all in the computer room, dusty, and the natural environment is normal. This is the industrial touch all-in-one machine can be used, and it is absolutely inaccessible on commercial computers. Needless to say, the accumulated dust will also make commercial computers inoperable. Therefore, in terms of adaptability to the natural environment, the integrated industrial touch opportunity is more advantageous, and it is not comparable to a commercial machine.
Secondly, in terms of the compressive strength at work, the regulations for heat pipe heat dissipation and hardware equipment are relatively high because of the need to maintain the working conditions at all times. Commercial computers are also slightly inadequate in these aspects. The industrial touch all-in-one machine can maintain good heat pipe heat dissipation, and it will continue to work for a long time.
Therefore, in view of the above, industrial touch all-in-one machines are more suitable for use in the field of Internet of Things technology than commercial computers. However, when the industrial touch all-in-one machine is used for actual operation, due to setting problems or hardware equipment problems, the touch screen often does not respond or makes an error. So, what are the main problems? How should it be resolved?
1. Accurate contact in some areas, and error in some areas
In this case, a large amount of dust or scale accumulates on the sound wave frequency reflection surface fringe around the sound wave frequency touch screen of the surface layer, which affects the transmission of the sound wave frequency signal.
Solution: Clean the touch screen. Pay special attention to the sound wave frequency reflection surface stripes on the four sides of the touch screen. The power supply of the touch screen control card should be disconnected when cleaning.
2. The part touched by the finger does not overlap with the mouse arrow
This situation is mainly due to the fact that no vertical line touches the center of the bullseye during the calibration process after the reinstallation of the driver is completed. Solution: Recalibrate the part.
When you perform the first calibration after reinstalling the driver installation, pay attention to the detailed content of the system software error report. "No control card found", "Touch screen not connected", etc., check the corresponding parts according to the prompt information.
The use of multi-functional touch all-in-one machines to serve the community can not only reduce labor costs, save human resources, optimize information display, etc., using machines instead of manual services can also effectively avoid the artificial services that may be caused by emotional effects. contradiction.
