Industrial PC 610 is just one of our YONGS product series. This brand is currently the most widely used in the industry platform. Among them, the most widely used is the industrial tablet computer, because it has several different models, and each type of tablet computer All have weird effects. In the current industry tablet computer environment, the occupation rate is still relatively high, and many customers trust the products of this brand.
Brief introduction of industrial computer 610:
The front extraction fan, which can be disassembled and replaced, can be cleaned. Simply clean the fan filter, without the need for a large number of troops to start the protection;
Shock-resistant drive bays plan to accommodate three 5.25" and one 3.5" disk drives
The extra confinement clamp with rubber pad can better prevent the board from being hit by unexpected blows in a sinister situation
The front panel indicator light shows the power supply and HDD operation status when
Lockable front door to prevent unauthorized access
Smart fans, operating at only 35 decibels, create a quiet working environment.
Long-distance management, condition monitoring, self-diagnosis.
IPC 610 key features:
1: The chassis adopts steel structure, which has high anti-magnetic, dust-proof, anti-strike ability, and can stabilize the work at high temperature.
2: There is a dedicated bottom plate in the chassis, with PCI and ISA slots on the bottom plate, 4U high support 14-slot backplane, 3 half-height disk drives can be placed in the front, one 3.5" FDD and one built-in 3.5" disk drive, front USB / PS2 interface, system status monitoring module.
3: There is a special 300WATX PFC PS/2 power supply in the chassis, which can support ATX motherboard and 400W PFC power supply, and the power supply has strong anti-interference ability.
The industrial computer 610 is usually installed on the CNC platform, and it will not be taken down easily after it is installed. It will be used for a long time. For this reason, each industrial computer must be carefully debugged before leaving the factory to satisfy customers. Only after the request can the detailed placement be held. Beijing Jinling Tiankong Technology has always attached importance to quality assurance, and strives to manufacture flawless high-quality, high-performance products, and always provide services at reasonable costs.
How should the industrial display be recuperated?
Industrial Display uses different perspectives to investigate surfaces that may differ. An industrial indicator is an indicator used in the process of industrial control or construction. The main difference between it and civilian or commercial displays is that the shell design generally adopts all-steel design, and the panel is divided into different materials such as ordinary iron plate, stainless iron, stainless steel, aluminum panel, etc., special design of dustproof and shockproof, suitable for industrial use High-level LCD display, in the case of high environmental requirements, consider adopting a wide temperature (-40 to 85 degrees) LCD display, currently only a small number of large international manufacturers produce this type of display, and the cost is more expensive. The main difference between it and civilian or commercial displays is that the shell design generally adopts an all-steel design, and the panels are divided into different materials such as ordinary iron plates, stainless iron, stainless steel, and aluminum panels.
The industrial display technology is a new type of human-computer interaction input method. Compared with the traditional keyboard and mouse input methods, touch screen input is more intuitive and convenient. In conjunction with the recognition software, the touch screen can also complete handwriting input. The touch screen consists of a test part and a touch screen controller placed in front of the display screen. When a finger or other object touches the touch screen placed in front of the display, the touched position is checked by the touch screen controller and sent to the host through an interface (such as an RS-232 serial port).
Industrial Display Product Features:
>> ICP-150 is a new industrial LCD monitor
>> Build 15" high brightness LCD display screen, resistive touch screen is optional
》>> LCD display brightness, contrast can be adjusted, and has standby energy-saving mode
>> The layout plan, the placement is innocent and convenient. The installation method is compatible with wall mount, VESA standard support arm, etc.
>> Widely used in telecommunications, electric power, multimedia, national defense, industrial automation construction, production and other platforms
This is how the industrial display should be recuperated:
Generally, the following aspects must be done:
1. The surface of the computer should be kept neat: although do not place items on the machine, it should be waterproof, dustproof and oil-proof.
2. All related power transformers and UPSs should be opened to prevent the temperature from being too high and causing the industrial integrated computer building to burn out.
3. Clean the industrial integrated computer on schedule, remove dust and stains.
4. The continuity of the power cord should be safe and unchanged, and it is not allowed to arbitrarily dispatch the industrial integrated computer and disassemble the internal devices.
5. After the industrial integrated computer is powered off and shut down, it should be turned on at least one minute later, although it should not be turned on and off frequently.
The trend of industrial displays quickly confuses all walks of life, and the development trend of industrial displays is getting better and better, and there are more and more varieties, so the development of industrial displays can be predictable and possible. Perhaps it will bring joy and usefulness to every industry in succession!
