Industrial touch all-in-one machines are industrial computers with better performance than conventional commercial computers. Industrial touch all-in-one machines can work normally in various harsh and complex environments, such as high and low temperature resistance, anti-interference, anti-static, waterproof and dustproof, and It can run for a long time. Of course, even the best machine needs maintenance. The maintenance of the industrial touch all-in-one machine mainly depends on these three aspects:
Screen:
1. Keep the screen clean: When the touch screen is exposed to the outside, it will accumulate dust continuously for a long time. When the dust accumulates too much, it will reduce the sensitivity of the touch screen, thereby reducing the accuracy of the screen. In general, everyone will wipe the screen clean with a dry cloth or paper towel. In fact, it is recommended that you regularly use industrial alcohol for scrubbing. Everyone will probably ask why we have to use industrial alcohol for scrubbing, because the human body secretes sweat and grease when using the machine. For example, some users who play mobile games know that a layer of visible grease will appear on the surface of the mobile phone for a long time. After wiping with a paper towel, the sensitivity will still decrease. In fact, the principles of mobile phone screens and capacitive computer screens are similar. They all use the electromagnetic induction of the human body for touch control. If there are foreign objects, it will affect the accuracy of the screen. The grease cannot be completely wiped off with dry cloth and paper towels. Therefore, it is necessary to use industrial alcohol for wiping.
2. Because the screen is in direct contact with the industrial environment, it is easy to splash some industrial residues on the surface. At this time, many people will choose to use a hard object to scrape off, which is very easy to damage the screen, after all, it is made of glass, which is still very fragile. It is recommended that you can choose an organic solvent for wiping according to the composition of the foreign body. This can avoid some unnecessary troubles.
Chassis:
There are generally two types of all-in-ones: fully enclosed fanless all-in-ones and non-fully enclosed all-in-ones with fans. All-enclosed fanless all-in-ones have dust-proof effects, and non-fully enclosed all-in-ones with fans need to pay attention to the placement position. Minimize the dust entering the chassis. When dust enters the chassis and accumulates to a certain extent, it will affect the operation of the fan, affect the heat dissipation of the fan and increase the power consumption. In addition to paying attention to the placement position, clean the dust on the fan regularly. If the machine is to be placed against a wall, pay attention to keeping a certain distance from the wall, so that there is room for air to flow to ensure good heat dissipation. Having said so much, everyone will probably ask why we need to ensure the heat dissipation of the machine? That's because the CPU will generate a lot of heat during operation, if the heat dissipation is not good. The temperature inside the machine will continue to rise, which will accelerate the aging of the components inside the machine and greatly shorten the service life of the machine.
Motherboard:
Industrial touch all-in-one motherboards generally can run for a long time in an environment with a large difference in high and low temperature, and there is no problem in using it under an environment of -10 to 60 degrees. However, you need to be careful not to turn off the power directly during the use of the machine. If the mapping table is too late to save due to abnormal power failure, it may cause disk loss and loss of the logical address to physical address mapping. After the power is turned on again, the SSD will not be recognized by the BIOS. The problem can only be solved by returning to the factory for repair, but if you return to the factory for repair, you can only solve your lost disk problem by re-opening the card. And reopening the card means the loss of all user data!
