Although the industrial touch display is a product used in industry, it has become more and more commercialized. In banks, government offices and even shopping malls, we can see convenient operation equipment. It has become our daily life. What should I pay attention to when using unavailable products?
1. If you are using a capacitive industrial touch monitor, it is recommended that you install the drivers required for the capacitive industrial touch monitor correctly according to the requirements of the manual.
2. When using a resistive industrial touch screen, if you find that the cursor does not move or can only move in a partial area, you can check whether the touch area of the touch screen is pressed by other touch objects. For example, once the touch screen is pressed by the display housing or cabinet housing, It is equivalent to a certain point being touched all the time, then the coordinate position feedback to the controller will be inaccurate, and the cursor will definitely not be positioned correctly. If the cabinet shell is pressed on the touch area, you can adjust the distance between the cabinet and the monitor screen to be larger. If the monitor shell is pressed on the touch area, you can try to loosen the screws of the monitor shell slightly.
3. In order to ensure the normal operation of the touch screen system, in addition to ensuring the correct installation of the system software, you must also remember not to install two or more touch screen drivers on a host, which will easily cause the system to run Conflict occurs at the time, so that the touch screen system cannot be used normally.
In many places, the precautions for the use of industrial touch monitors mainly include the above. I hope everyone should follow the correct instructions when using them to avoid reducing the occurrence of failures. I hope to help you.
