◆Safety protection: prevent electric shock and fire.
◆Safety measures: Install to avoid short circuit and ensure safe electrical distance (>2mm). ◆Input connection is correct, especially Vin and GND; input is within the allowable range.
◆The output should not be connected reversely, which will cause the load to increase.
◆The output connection must be*. A gap may cause discharge, or CCFL will not light up, or flicker, etc., which will also cause the inverter temperature to rise. ◆The connection line from the inverter to the CCFL should be as short as possible. The connection forms a parasitic capacitance: a. Shorten the life of the CCFL, b. Reduce the brightness of the CCFL, and c. Reduce to the starting voltage after the CCFL. At the same time, the output line is equivalent to an antenna, which is easy to radiate. If an extension cord is necessary, a high-voltage-resistant wire should also be used.
