The LCD splicing screen is different from the LCD TV. The LCD splicing screen has rich features and can be used for 24 hours for a long time. The application occasions are also very wide. So now the LCD splicing screen has been seen everywhere. The LCD splicing screen is easy to be ignored by many people during the installation process, resulting in the maintenance of the later project and the shortened life. So how do LCD splicing screens install splicing? Today, the LCD splicing screen manufacturer Zhongyi Rui gives everyone a suggestion.
1: First of all, confirm the fixing method of the LCD splicing screen, whether it is a floor stand, a cabinet, or a wall mount, and measure the distance from the stand to the back wall (at least one person can be repaired in the back)
LCD splicing screen bracket installation diagram
2: The bracket must be firm, and the carrying weight is determined according to the size and quantity of the LCD splicing screen, generally 1.5 times the weight of the screen, so that it is stable up, down, left, and right.
LCD splicing screen bracket installation diagram
3: After the bracket is installed, start to install the screen. The installation sequence of the screen is from left to right, and from bottom to top. Adjust the gap between the screen and the screen to ensure the horizontality and verticality.
4: After the screen is installed, it is connected. The splicing screens are usually connected with a network cable as a control line. Each screen is connected in series with a network cable. The network cable of the first screen should be connected to the serial port on the computer, so that the entire screen can be controlled. Big screen.
5: How to connect the signal line: Each screen needs to be plugged in a signal line. Nowadays, HDMI high-definition lines are more commonly used in the world. The signal lines on the screen are connected to the distributor or matrix or multi-screen processor, so that each screen Display images that can be completed on the screen.
Installation effect diagram of LCD splicing screen bracket
6: Debugging stage: After the screen is powered on, the screen can be debugged. Each screen of the computer serial port displays the address code, assigns the location of the screen, and sends instructions to it, and the screen debugging is completed.
An excellent project, perfect installation is very important, not only can beautify the effect of the entire screen, improve the visual effect, but also have a major impact on the maintenance and service life of the screen in the future.
