As the name implies, industrial displays are displays used in industrial environments. There will be some loss during the operation of the machine. Long-term wear and tear will cause damage to the machine. Therefore, maintenance work is essential. Let's think about it. Talk about the maintenance method of industrial display control panel.
First of all, it is important to avoid water ingress in industrial displays.
Non-special industrial displays are not waterproof, so be careful to prevent anything with moisture from entering the display. If this happens, don’t panic. Before turning on the screen, you find that the surface of the screen is foggy. Just wipe it off with a soft cloth to clean it up. If the moisture has entered the display, then put the display in a warmer place. Place, evaporate the moisture inside. If the screen is "damp", please contact the after-sales service, because when the moisture is severe, it will damage the components of the liquid crystal display, which will cause the liquid crystal electrode to corrode and cause permanent damage. . In addition, always try to avoid using industrial LCD displays in humid environments unless it is a waterproof LCD.
Second, avoid long hours of work
The pixels of industrial displays are composed of many liquid crystals. Continuous use for too long will cause the crystals to age or burn out. Once the damage occurs, it will be permanent and irreparable. Generally speaking, do not leave the LCD display on for a long time (continuously more than 72 hours). If it is not in use, turn off the display, or run a screen saver or just let it display the completely white screen content.
Third, avoid "hard bumps"
Industrial displays are relatively fragile, so you should be careful not to be "breached" by other devices during normal use. Also pay attention when using the cleaner. Do not spray the cleaner directly on the screen. It may flow into the screen and cause a short circuit. The correct way is to use a soft cloth to stick the cleaner and gently wipe the screen. Remember, The ability of liquid crystal display to resist "shock" is very small, and many crystals and sensitive electrical components will be damaged when subjected to an impact.
Finally, do not disassemble the LCD monitor privately
LCD industrial displays, like other electronic products, generate high voltages inside the LCD. Disassembling the LCD industrial display without permission is not only dangerous, but also easy to increase the failure of the LCD industrial display.
