The product introduction of the industrial computer 610, let's start by asking about his chassis. The chassis of the industrial computer is specially designed according to the size of the computer's motherboard, and also considers the computer's vibration, anti-strike and other external environment disturbance problems. . An all-steel chassis was planned.
Then there is the power supply of the industrial computer 610. The power supply of YONGS' industrial computer uses the professional industrial power supply. It can run for 250,000 hours without interruption, and there is a strong voltage to ensure the safety of the motherboard.
Next is the motherboard of the industrial computer 610. According to different requirements, the industrial computer is divided into two types of motherboards, which are the atx motherboard and the slot-type single-board computer.
IPC 610 features:
1) The chassis adopts steel structure, and the industrial computer has high anti-magnetic, dust-proof and anti-strike capabilities.
2) There is a dedicated backplane in the chassis, and there are PCI and ISA slots on the backplane.
3) There is a special power supply in the chassis, and the power supply has strong anti-interference ability.
4) It is required to have the ability to work continuously for a long time.
IPC 610 should pay attention to the following points during after-sales:
1. In addition to measuring whether the output voltage of each group is normal, the power supply of Xiumu must also measure the Power Good light signal;
2. The replacement parts must be heated and shrinkable sleeves must be added. In addition to preventing short circuits between parts, its function depends on the characteristics of certain parts.
3. Pay attention when locking the screw, do not drop the screw in the power supply, so as not to become a short circuit.
4. Connect the after-sale power supply to the motherboard and power on burn in to check whether the power terminals are intact.
The IPC 610 is a 19" rack-mounted industrial computer case for 4U high-link tasks. It can accommodate 14-slot PCI/ISA backplanes or commercial motherboards, and supports a wide range of power supply models. There is a lock on the front panel of the case. The door is closed to prevent unusual operations, and the airflow in the chassis is controlled by a hot-swappable cooling fan. The industrial computer 610 is resistant to shocks, vibrations, and can work in the poisonous environment of dust.
