The IPC 610 is designed for mission-critical applications. The chassis can accommodate a 14-slot PCI/ISA bus passive backplane or an ATX motherboard, and supports a variety of power supplies. A lockable panel door prevents unauthorized access to the chassis. A hot-swappable filtered cooling fan can keep the atmosphere in the entire case at positive pressure. With its screw clips and anti-vibration mounted drive bays, the IPC 610 can work in the most insidious conditions of shock, vibration, and dust.
The IPC 610, as the main industrial control model inside the YONGS 4U IPC, not only has the characteristics of IPC in terms of anti-strike, dust-proof, radiation-proof, etc., but also has abundant IO expansion, which can satisfy most industrial scenarios.
The selection of industrial computer 610 is mainly based on the user's needs. Focus on a few ingredients:
1. Chassis size and shape
YONGS IPC-610L Dimensions: Dimensions (HxD) 482x177x480mm (19"x7"x18.9"), the detailed dimensions are as follows: IPC-610L has only one color of industrial gray, and the model of the black case is: IPC-611
2. Mainboard interface
In order to meet various industrial scenarios, the 610 mainboard of the industrial computer is also relatively more, and it is mainly based on the two dimensions of the CPU pin type and the mainboard interface. Before purchasing an industrial computer, inquire about the required interfaces and functions. CPU:
Until March 2018, YONGS motherboards support 775, 1155, 1151, 1150 and some Xeon series CPUs. Such as: E5300, E7400, I72600, I74790, I76700, I77700, etc. The cost of the whole machine is also basically proportional to the CPU. Motherboard interface:
There are several major categories of YONGS industrial motherboard interfaces: serial port (RS232/RS422/RS485), network port (gigabit Realtek/gigabit In), PCI, PCIExpress (x1/x4/x8/x16), parallel port (LPT printing port) ), performance interface (VAG/DVI/HDMI/DP), ISA (old building), etc.
3. Construction:
Because there are many models of YONGS industrial motherboards, the corresponding construction combinations are relatively complicated, and there are many construction varieties.
The IPC 610's cooling system with two high CFM fans can provide sufficient airflow to cool the critical components of the system. The front-end wired USB and PS/2 keyboard I/O interfaces of the IPC 610 can be connected to various external structures for data transfer, backup and input. The naive machine plans to support either a single PS/2 power supply or redundant power supplies (going through changing power bays).
