The difference between BIDI SFP optical module and ordinary SFP optical module

Jun 13, 2021

Leave a message

As a kind of optical device used in optical communication network, optical module plays a role of photoelectric signal conversion. However, with the rapid development of the optical network market, the packaging and speed of optical modules have increased significantly. In this article, Gigalight Communications will introduce you to SFP optical modules.


SFP optical modules include BIDI SFP optical modules and ordinary SFP optical modules. What does each of these two SFP optical modules mean? What are the differences? Guest officers, please continue to look down.


What is BIDI SFP optical module?


 



 



BIDI optical module is an optical module that uses WDM (wavelength division multiplexing) bidirectional transmission technology, which realizes simultaneous bidirectional transmission in an optical channel on an optical fiber. The BIDI optical module has only one port, and transmits and receives signals on an optical cable through an integrated two-way coupler. Therefore, it must be paired and used.


How does BIDI optical module work


In order to be able to work efficiently, BIDI optical modules must be paired to use, by tuning the duplexer to match the desired wavelength of the transmitter and receiver, to achieve two-way data transmission.


BIDI optical module rate


BIDI optical module rate is 155Mbps-3.125Gbps


Advantages of BIDI optical module


The most obvious advantage of using BIDI optical modules, such as SFP+ BIDI and SFP BIDI optical modules, lies in reducing the cost of optical fiber cabling infrastructure. The BIDI optical module reduces the number of ports on the fiber patch cord panel, reduces the space occupied by the tray dedicated to fiber management, and reduces the number of optical cables that need to be used.


General SFP optical module introduction


 


 


 



The SFP optical module is a hot-swappable small package module in an SFP package. The current maximum rate can reach 10.3G, and the interface is LC. And it is composed of laser (including transmitter TOSA and receiver ROSA), circuit board IC and external accessories. The external accessories are composed of shell, base, PCBA, pull ring, buckle, unlocking piece, and rubber plug.


SFP optical module classification


①According to speed: 155M/622M/1.25G/2.125G/4.25G/8G/10G, of which 155M and 1.25G are used more in the market;


②According to wavelength: 850nm/1310nm/1550nm/1490nm/1530nm/1610nm, the wavelength is 850nm for SFP multimode, the transmission distance is below 2KM, the wavelength is 1310/1550nm for single mode, the transmission distance is above 2KM, relatively Said that the price of these three wavelengths is cheaper than other wavelengths;


③According to distance: short distance, middle distance and long distance;


④According to the transmission mode: electrical port, single-mode, multi-mode;


⑤Special types of SFP optical modules include: BIDI-SFP, electrical SFP, CWDMSFP, DWDMSFP, SFP+ optical module, etc.


The difference between SFP and BiDi SFP


As we all know, a common SFP module usually has two ports, one is the TX port for transmitting signals, and the other is the RX port for receiving signals. Different from common SFP modules, BiDi SFP modules have only one port, and use an integral WDM coupler on a single optical fiber to transmit and receive signals.


The above is the introduction and difference between BIDI SFP optical module and ordinary SFP optical module.


Send Inquiry