The research and development principle of industrial all-in-one computer motherboard

Feb 06, 2020

Leave a message

The development of a new industrial all-in-one computer motherboard will go through precise principle design, circuit wiring (EDA, electronic design automation), BIOS writing (basic system input and output) and driver software, prototype production, design certification, and small batches Trial production and other processes. The pros and cons of a motherboard, the technical level of research and development will play a decisive role, especially the technical level of principle design, circuit wiring, and BIOS writing is the key, as the saying goes. Rome is not built in a day. A mature motherboard is designed by a professional R&D team with as little as three to five years and more than ten years of experience.


Senior principle design engineers can demonstrate their skills in the selection of design schemes, circuit design, key component parameters and manufacturer selection. In order to pursue cost, some manufacturers will start from the design aspect, such as changing the three-phase power supply circuit of the CPU to two-phase, which will reduce the cost, but has buried the hidden danger of burning MOS tubes rather than CPUs. For another example, choose some cheaper components. Take capacitors as an example. The ones made in Japan are expensive, but their withstand voltage and heat resistance are also better. Because the CPU power supply circuit has high requirements on the capacitor’s withstand voltage and heat resistance, The factory generally chooses better quality capacitors, such as Japanese NICHICON or RUBYCON capacitors. If you choose lower quality capacitors, it is likely to cause rapid aging after working for a long time in a high temperature working environment. In severe cases, the capacitors may be damaged. burn. For another example, both internationally and domestically, there are strong requirements for electromagnetic compatibility. The national standard GB9254 has clear regulations on electromagnetic radiation, which is divided into two levels: A (industrial) and B (civil). In particular, civilian standards are more stringent, because it will directly affect the health of users and the surrounding population. We have done a small experiment and placed a pot of cactus bonsai next to a strong radiation CRT display for two to three months. It grew in the desert, and the tenacious cactus withered unexpectedly.



If you want to know whether the product you buy meets the international or national standards, you can ask the manufacturer to show the inspection certificate of the national authority, or the European CE certification, or the American FCC certification. In order to ensure that the electromagnetic radiation meets the standards, many large factories invest in the construction of laboratories, first test by themselves and then send them to authoritative organizations for certification. Just building a half-wave anechoic chamber for measuring electromagnetic radiation requires investment of nearly 10 million yuan in equipment. The design, wiring and components of the motherboard will have a direct impact on electromagnetic radiation. For example, a senior EDA engineer must not only have a good understanding of the layout of high-frequency and low-frequency traces, so as to avoid crosstalk, but also consider that the right angle of the trace may cause If a hardware engineer considers cost reduction or insufficient experience when selecting certain components, such as magnetic bead components, electromagnetic radiation will also be caused.


Send Inquiry