What is the difference in touch sampling rate, reporting rate, instantaneous touch, and three-finger touch? The default is that high

Jun 09, 2021

Leave a message

Touch sampling rate, abbreviated as sampling rate, means the rate at which a finger is tapped or swiped on the screen and fed back by the screen. Simple can be understood as the touch sensitivity of the screen. The higher the sampling rate, the faster the response of the mobile phone screen, the lower the touch delay, and the stronger the operability when playing games.
 
 
The unit of the touch sampling rate is also Hz, which means that the computer collects more than 100 signal samples per second, and the number of samples per second composed of discrete signals extracted from continuous signals. It can be simply understood as the point data that the touch IC can collect every second when the finger is pressed or swiped on the touch panel, such as 120Hz, 240Hz, 270Hz, 300Hz, 360Hz, 480Hz, 500Hz, etc. Theoretically, the larger the value, the touch The higher the sensitivity of the control.
 
For example, a mobile phone with a high sampling rate takes less time to raise a mirror and shoot a shot when playing a chicken game than a mobile phone with a standard sampling rate. It can detect and kill the enemy earlier. This is also the case when many mobile phones are playing games. The reason why the enemy has been killed before the enemy is discovered, because thanks to the high sampling rate, others can find you earlier and kill you at a faster speed.
 
It has to be said that the iPhone is the first mobile phone to apply high sampling rate to the screen. Since the iPhone X, the touch sampling rate of the mobile phone screen has been 120Hz, and the previous iPhones are probably around 100Hz (iPhone 6 series, 6s) Series, 7 series), while other Android phones at that time were all 60Hz, which is also the reason why the iPhone’s screen has high sensitivity and gives people a smoother impression.
 
By 2021, the touch sampling of the Android phone Xiaomi 11 Ultra has reached 480Hz, while the iPhone12 Pro Max is still hovering at 120Hz, so now the sampling rate of Android phones has been significantly ahead of the iPhone.
 
2019 and 2020 are the era of popularization of refresh rate and sampling rate. Today in 2021, both high, middle and low-end mobile phones will be equipped with high refresh rate and high sampling rate. However, in the vocabulary promoted by the manufacturer, there is a professional term that you don't know if you noticed it, that is-touch report rate.
 
The touch report rate is the same as the touch sampling rate. It is a key indicator to measure the sensitivity of the mobile phone screen. Because it is a new term and most manufacturers do not make publicity, I asked the first company to promote the touch report. The customer service of iQOO, the manufacturer of dot rate, got the following definition: touch report rate refers to the touch panel of the screen scans xxx times per second, and then according to the touch chip algorithm, remove the noise false alarm dots, and get the rest The touch sampling signal.
 
Touch report rate, that is, the number of times the IC is touched to report the coordinates in a unit time.
 
So what is the difference between touch sampling rate and touch reporting rate? However, what the customer service explained is also in the cloud, only that the meaning of the two is different, but I can't tell the specific difference.
 
Under the literal meaning, the touch sampling rate is to collect data, and the touch report rate is to report data, plus the explanation of the customer service "remove the noise false report point jump", so it seems that the report point rate is high at the same frequency The sensitivity of the screen touch is higher than that of the high sampling rate, but the only mobile phone manufacturer that promotes the term "touch report rate" is iQOO, so what you say is what you say. . .
 
In addition, iQOO also promoted another new term-instantaneous touch sampling rate
 
Then I also asked the official iQOO customer service and gave the following explanation: In the game scene, when the finger is not touching the screen, the touch can scan up to 1000 times per second. Control information, high-speed response, allowing you to experience a quicker one-step control experience in the game.
 
In our simple understanding, the meaning of the instantaneous touch sampling rate is that before the finger taps the screen, data can be collected 1000 times per second to detect touch events at a faster speed. After the finger taps the screen, the sampling rate is The frequency will drop to the standard value (for example, iQOO7 300Hz).
 
Let’s talk about the vocabulary used by most mobile phone manufacturers—single-finger touch, multi-finger (three-finger) touch
 
The so-called single-finger touch refers to the sampling rate of the mobile phone in normal mode (non-game mode) when using a single finger to slide the screen, and the sampling rate of tapping the screen with more than two fingers cannot reach that high. (For example, the picture above, single-finger touch 500Hz)
 
Multi-finger touch means that when the phone is tapped with more than two fingers (including three fingers) in the game mode, the sampling rate can still reach 480Hz (for example, the three-finger touch 480Hz)
 
In addition, in some mobile phones, the official high sampling rate can only be stimulated in the game mode, while the sampling rate in the general mode is not as high as the official advertised. For example, the OnePlus 9 series supports 240Hz sampling rate (official promotion). "Five Fingers" sampling rate), but this is only a high sampling rate when the game mode is turned on, and the touch sampling rate in normal use (without the game mode) is only 120Hz.
 
There are also some more conscientious mobile phone manufacturers. The touch sampling rate of the screen in the normal mode and the game mode is the same, which is called the global sampling rate. For example, the Meizu 18 Pro supports a global 240Hz touch sampling rate.

Send Inquiry